4.2. Accessing the System

You can log into the system using either the system console or via a web browser.

Proceed to one of the following topics for more information:

Logging in from the System Console

You can log in using the Linux system console.

Open the system console. You should see a login prompt similar to the example below.
Login with the username (lwsa) and the password (chosen when the system was first installed).

Note: If the screen appears blank, you may have to press a key to deactivate the screen saver.

You can access LWSA from a web browser using the URL provided by the system console.

Open the system console so that you can see the necessary URL (in the example above, the URL is: http://10.9.0.56:8080/lwsa).

Note: If the console does not show a valid URL, you must first login using the console method, and follow the menu prompts to set up networking.
Type the URL in the web browser of your choice.
A login screen appears.
Specify the username (lwsa) and password (chosen when the system was first installed).
The LWSA interface appears, with the General tab selected.

This page was: Helpful | Not Helpful